Ferrum HYPSOS OPEN BOX DEMO MODEL DEAL

HYBRID POWER SUPPLY - ***Comes with full warranty and is able to be tested here in the shop*** We have all the packaging and cables.

HYPSOS is in a new category all of its own, it was made in conjunction with the OOR and ERCO to provide accurate and stable power so they can operate at their most optimal performance. The great thing though is that you can use this power supply with lots of other manufacturers devices such as Chord Hugo TT's/TT2 to up their sound quality to the next level. The HYPSOS is a hybrid power supply that operates in Linear/Switching so that the noise floor is as low as can be. It cleans the power so that noisy ground hums can disappear. We have this on display here in the store for you to try out. 

The HYPSOS uses a unique output 4-pin cable. Two of the wires deliver the power and the other two are providing the feedback so that it knows where the voltage is constantly at. HYPSOS comes with one of the two high quality DC power cables fitted with a 5,5x2,5mm and a 5,5x2,1mm DC plug, to connect to the most commonly used DC inlets. If you need different type of DC plug please contact us. To connect this to either the ERCO or OOR then you would want to purchase the Ferrum Power Link DC Power Cord@ $130 Canadian Dollars (plus tax). All Ferrum products are backed by a 3 Year Warranty.

Here are the specs:

• HYPSOS linear/switching hybrid power system​
• 110 ~ 240V AC in
• 5 ~ 30V DC out
• 6A/80W
• Power input: 110-120 & 220-240V AC/50-60Hz (EU/US Version)
  90 – 110Vac/50-60Hz (JP Version)IEC C14 power inlet, a fuse holder with power on/off switch plus two-stage EMI filter for low impedance load with better noise attenuation in low frequency applications
• Mains cable: US/EU/UK
• DC OUT cable: 5×2.5mm DC plug / 5×2.1mm DC plug Custom cables made to order at additional cost
• Output Voltage Range: 5-30 [V]
• Max Continuous Output Current (for V_out below 13,3V): 6 [A]
• Max Continuous Output Current (for V_out higher than 13,3V): l_out= 80[W] / DCout[V]
• Maximum Impulse Current: 9A
• Maximum Impulse Power: DC V_out*9A (270W for 30V)
• Max Continuous Output Power (for V_out below 13,3V): P_out = V_out[V] * 6[A]
• Max Continuous Output Power (for V_out higher than 13,3V): 80W
• Dimensions (without knob, feet and connectors) (W x D x H , mm / inches): 217.5 x 206.5 x 50.0 / 8.6 x 8.1 x 2.0
• Net weight (kg / lb): ~ 2,89 / ~ 6.2
• Primary winding fuse: IEC 5x20mm, 250V 3.15A,
  slown-blown for Japan version / 250V 2A, slown-blown for Europe,
  US version
• Secondary winding fuse: Littefuse 154004T, 4A
• Power consumption: 230VAC, 50Hz @ 12VDC out/: Idle – 6VA @ 15W load – 30,7VA @ 60W load – 98VA @ 80W load – 133,9VA

Here is some info from their website: